Release Notes Product: ENTTEC ODE MK3 Product SKU: 70407 ---------------------------------------------------------------------------------------- Note: Following an update, power cycle your DIN Ethergate and clear your web browser cache if using the same IP. (Ctrl+Shift+R) ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.8 Release 8/05/2025 Optimisation: - Configurable source port for Art-Net, sACN, and ESP packets. - Support for both unicast and subnet-broadcast ArtPoll Reply and Art_Tod_Data packets. - Device settings are now retained during firmware updates. - Improved IP address handling to ensure proper response when on the same subnet as the sender. Fix: - Fixed a RDM bug that would prevent devices being discovered on a port when more than 1 RDM device was connected. - Fixed a bug that receiving 2^31 unicast packets would force the device into boot mode. - Fixed a stability issue causing the device to reboot under heavy network traffic (>50 Mbps). ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.7 Release 10/09/2024 Optimisation: - Automatic Recovery Mode: If the DMX ports are physically connected during startup, the device will automatically reset its settings and enter firmware update mode. - Enhanced Web UI: - Displays last device uptime - Added "Identify" function - Autofill support - Improved compatibility and response handling for HTTP/1.1 requests. ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.5 Release 05 May 2023 Fix: - Fixed DMX receiving issue when less than a full frame of 512. - Fixed DMX MAB timing bug. ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.4 Release 21 November 2022 Fix: - Fixed to allow receival of Art-Net/ESP/sACN packets sent by the device itself. - Fixed Art-Sync/sACN-Sync merging bug. ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.3 Release 26 October 2022 Fix: - Fixed to allow ESP Universe 0. ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.2 Release 6 October 2022 Fix: - Fixed LED mismatch. ---------------------------------------------------------------------------------------- ODE MK3 Firmware V1.1 Release 11August2022 Optimisation: - Unified DHCP handling across both bootloader and firmware. - Improved RDM discovery reliability. - Restructured internal repository for improved maintainability. Fix: - Resolved netmask mismatch issue. - Enabled broadcast packet support based on the device’s assigned netmask. - Updated DMX output settings to match factory defaults. - Corrected UI tab naming. - Fixed configuration of bootloader and firmware storage locations. ---------------------------------------------------------------------------------------- ODE MK3 FW ver 1.0 - Initial Release. ----------------------------------------------------------------------------------------