Release Notes

Product:	ENTTEC S-PLAY MINI
Product SKU: 	70093

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
To access the bootloader please follow the steps:
1. Press and hold the reset button while powering up the unit.
2. Continue holding and release the button within 10 seconds of powering up.
3. The unit will load the boot and the web interface will be redirected to the boot page. Manually refresh the page if needed.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S-PLAY MINI Release V1.0.4 29 May 2025
Bug Fix:
	- Fixed bug that Output 2 was removed upon resetting to defaults (bug from 1.0.3).
	- Fixed bug that name of cue was erased after preview.
	- Fixed bug that would cause device to crash when recording a large number of Dynamic Cues.

Improvement:
	- sACN Priority is assigned for each Universe when recording.
	- Implemented sACN sequence numbering for outgoing sACN data.
	- Blackout frames sent on output swap (when "Restrict to one active playlist per group" is active).
	- Unused outputs will now stop sending data. (rather than holding at last state).
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S-PLAY MINI Release V1.0.3 23 April 2025
Bug Fix:
	- Fixed bug that caused the device to crash when 4 or more of the same trigger type were used in playlists.
	- Fixed bug where device would register all digital inputs as true on startup.
Improvement:
	- Static cue channels can be individually edited.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S-PLAY MINI Release V1.0.2 1 Nov 2023
Bug Fix:
	- Fixed bug that caused temperature instability in units.
	- Firmware updates will now only be done through the bootloader and the firmware will direct the user to the boot page.
	- Fixed footer links.
	- Fixed error messages when intensity values were typed in manually.
	- Fixed bug with which multiple duplicate events or triggers were created.
	- Fixed bug that would cause a 404 error when the interface landing page was deleted.
	- Fixed bootloader home button issue caused by cache (Splay Mini boot V1.1)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
S-PLAY MINI Release V1.0.1  14 Sept 2023

Bug Fix:
	- Fixed DMX direction bug
	- Fixed a bug that would prevent adding cue to playlist if no playlists were created
	- Fixed a bug in playlist editor for fade in/out.  
	- Fixed Trigger - Digital input port orientation image.
	- Fixed playlist intensity errors  

Improvement:
	- DMX port will temporary allow DMX input for trigger/recording even the DMX is set to output.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

S-PLAY MINI Release V1.0.0  07 Sept 2023

	- Initial Release
	- Known bug: 
		The DMX port direction will become uni-directional (either input or output) after 2nd attempt.
		Temporary Fix: Power-cycle the unit.

		[We are prioritising this fix (V1.0.1 FW)] 



--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------